F450 PCB Frame Kit CC3D EVO Flight Controller Board XXD A2212 1000KV Motor 30A ESC 1045 Props For Rc Quadcopter

F450 PCB Frame Kit CC3D EVO Flight Controller Board XXD A2212 1000KV Motor 30A ESC 1045 Props For Rc Quadcopter
  • Vendor U-Angel-1988 Trade Co.,Ltd
  • Volume Retail sales 1 piece
  • Original Price US $62.45piece
  • Last Price US $55.58piece
  • Shipping Free Shipping
  • Save US $6.87piece11% off
  • Product Rating 3.9

Tags: f450, frame, cc3d, flight, controller, board, a2212, 1000kv, motor, 1045, props, quadcopter

You need to ensure that before you get a F450 PCB Frame Kit CC3D EVO Flight Controller Board XXD A2212 1000KV Motor 30A ESC 1045 Props For Rc Quadcopter you have previously seen and read the description of the merchandise first. In this manner you can be sure that you are getting the right product that may suit your needs. Since this F450 PCB Frame Kit CC3D EVO Flight Controller Board XXD A2212 1000KV Motor 30A ESC 1045 Props For Rc Quadcopter has top quality it is among the best sellers in the market now and several folks are recommending the product to their family and friends. These days this product is actually affordable for nearly everyone and it’s an excellent buy for the money. You don’t need cheaper products if it will only sabotage your work and can not provide you with the kind of quality that you need in the product. With the bigger price you can be sure that your cash will probably be worth spending in this item.

F450 PCB Frame Kit For Quadcopter
Wheelbase: 17.7in/450mm
Made by advanced engineering material,super strong & smooth
Kit(need you assemble yourself)


CC3D EVO CopterControl Hardware Features

WIth a function of being directly plugged into the satellite receiver(It needn\'t conversion cable)

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.

3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.

Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.

Software support for Windows, for mac and Linux.

Direct high speed USB support with no drivers required, a truly plug and play device.

for spektrum satellite receiver support.

Futaba S-BUS hardware support.

Innovative Flexi-port technology for superior port flexibility.

4Mbits on-board EEPROM for configuration storage.


Flexiport

CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C

and a single serial port or dual serial ports, according to your connectivity needs.


Superior user experience

OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.

The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!


Sensors and Components

3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2,

Supports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers.

Simultaneous support for multiple receivers.

ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels

MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum/JR satellites

FlexiPort (configurable): serial telemetry, GPS, for spektrum/JR satellites, or I2C peripherals (under development)

10 PWM outputs to servos or ESC\'s, or for camera stabilization

Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.

Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz
XXD A2212 KV1000 Brushless Motor



Description :

Name: A 2212 A2212 1000KV Brushless Outrunner Motor W/ Mount
For: RC Aircraft / KKmulticopter 4-Axis/6-AXIS Quadcopter UFO
KV: 1000
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Weight: 47g
Including: 1 set 2212 1000KV Brushless Outrunner Motor with Mounts *4
Name : A(200200)608 - 4 x Brushless Motor A2212/13 KV1000.
No load Current : 10 V : 0.5 A.
Maximum current: 12A/60s.
Apply to the ESC : 30A.
Apply to the Lipo : 2 - 3S.
Apply to the NiCD / NiMH : 6 - 9S.
Apply to the Propeller : 8x4.5" 9x4.5" 10x4.5" 10x4.7".
Apply to the three Propeller : 7x4.5" 8x4.5" 9x4.5".
Does not contain Dimension : 28.0mm x 26.8mm .
Does not contain Dimension : 28.0mm x 40.0mm .
Shaft diameter : 3.175mm.


Package Including:
1PCS F450 Frame Kit
1pcs black plastic landing gear
1PCS CC3D Flight Controller Board
4PCS 30A Brushless ESC
4PCS XXD A2212 1000Kv Motor
1pcs distribution board
2Pairs * 1045 Plastic Props

ESC

';